DIY Direct Drive Turntable

Amplifikatörler, Amfi Modelleri ve fiyatları, en iyi amfi, high end amfilikatör

Our first DIY Turntable project comes to us from Hungary by a talented DIYer, Nandor.  His DIY turntable project uses the platter and the direct drive motor and control assembly from a Dual 701 record player as the starting point.  The plinth of the turntable is built-up using three pieces of plywood that are stacked and glued together.  This improved plinth results in better dynamics in the lower registers and a firmer mid band.DIY Record Player with Dual 701 DriveThe tonearm is a 3 month DIY project in itself, constructed using a trial and error approach.  The custom tonearm is suspended in air by magnets and a single mono-filament thread is used as an alignment guide and the pivot point.  The result is a custom built tonearm which minimized friction.Magnetically Stabilized Record Player TonearmDIY TurntableNandor goes over the details required to make a great looking turntable using common items.  With the fantastic new tonearm and improved plinth has this old Dual 701 sounding better than ever.  For full project details see the  DIY Turntable project page.More Phono Projects Moving Magnet (MM) Phono Preamp KitDIY JFET RIAA Phono Preamplifier Kit12AX7 / 12AT7 Tube RIAA Phono Preamp ===
See the DIY Audio Projects website for more project ideas.

Need parts for your projects – try Parts Express for almost everything DIY Audio and Video.

Amplifikatörler, Amfi Modelleri ve fiyatları, en iyi amfi, high end amfilikatör

diyaudioprojects

Our first DIY Turntable project comes to us from Hungary by a talented DIYer, Nandor.  His DIY turntable project uses the platter and the direct drive motor and control assembly from a Dual 701 record player as the starting point.  The plinth of the turntable is built-up using three pieces of plywood that are stacked and glued together.  This improved plinth results in better dynamics in the lower registers and a firmer mid band.
DIY Record Player with Dual 701 Drive
DIY Record Player with Dual 701 Drive
The tonearm is a 3 month DIY project in itself, constructed using a trial and error approach.  The custom tonearm is suspended in air by magnets and a single mono-filament thread is used as an alignment guide and the pivot point.  The result is a custom built tonearm which minimized friction.
Magnetically Stabilized Record Player Tonearm
Magnetically Stabilized Record Player Tonearm
DIY Turntable
DIY Turntable
Nandor goes over the details required to make a great looking turntable using common items.  With the fantastic new tonearm and improved plinth has this old Dual 701 sounding better than ever.  For full project details see the  DIY Turntable project page.

More Phono Projects